There are many tools for electronics but here I will give some important components which every electronic lover should have
For electronics work the best type is one powered by mains electricity (230V in the UK),
it should have a heatproof cable for safety.
The iron's power rating should be 15 to 25W and it should be fitted with a small bit of 2 to 3mm diameter.
You must have a safe place to put the iron when you are not holding it.
The stand should include a sponge which can be dampened for cleaning the tip of the iron.
The best size for electronics is 22swg (swg = standard wire gauge).
A tool for removing solder when desoldering a joint to correct a mistake or replace a component.
This is an alternative to the desoldering pump shown above.
For trimming component leads close to the circuit board.
Most designs include a cutter as well, but they are not suitable for trimming component leads.
